10.0.0.1 is a private IPv4 address that certain routers, modems, gateways, and other networking equipment can use. It provides a local route to the device's management interface, where users can control different network settings. Depending on the router, the admin panel may allow you to change the Wi-Fi name, update passwords, check connected devices, manage security settings, and configure other network options.

What is 10.0.0.1 IP Address?

10.0.0.1 IP addressThe is part of the private IPv4 address range reserved for local networks. It is not a public internet address and is generally accessible only by devices connected to the same network.

When a compatible router is configured with 10.0.0.1 as its local gateway, users can enter this address into a web browser to reach the router's login interface. After entering the correct administrator credentials, users can access the available configuration tools.

Not every router uses this address. The default gateway depends on the manufacturer, model, and network configuration.

How Does 10.0.0.1 Work?

A router uses a local IP address to communicate with devices connected to its network. If the router's gateway is 10.0.0.1, computers and other devices on the network can communicate with it through this address.

10.0.0.1When you enter into a browser, the request stays within your local network and is directed toward the router. If the router has a web-based administration interface, it displays a login page where you can enter your administrator credentials.

How to Log in to 10.0.0.1

Logging into a compatible router normally takes only a few steps:

Connect your device to the router using Wi-Fi or an Ethernet cable.
Open Chrome, Edge, Firefox, Safari, or another web browser.
10.0.0.1Enter into the address bar.
EnterPress and wait for the login page.
Enter the administrator username and password.
LoginSign InSelect or .
Once authenticated, you can access the router's configuration dashboard.

If the page fails to load, confirm that 10.0.0.1 is actually the router's gateway address.

Router Settings Available at 10.0.0.1

The administration panel can contain many different options depending on the device. Common settings include:

Wi-Fi network name and password
Wireless security
Connected device management
DHCP configuration
LAN settings
Guest Wi-Fi
Parental or access controls
Firmware updates
Administrator credentials
Network status information
Router restart and reset options

It is best to change only settings that you understand because incorrect configuration can affect the network connection.

How to Change Wi-Fi Password Using 10.0.0.1

WirelessWi-FiWLANTo change the wireless password, log in to the router using 10.0.0.1 and open the , , or section. Locate the security or password field and enter your new password.

Choose a password that is difficult to guess and avoid using simple personal information. After saving the changes, connected devices may be disconnected and will need to reconnect using the new password.

How to Change Wi-Fi Name

SSIDThe wireless network name is usually called the . You can change it by opening the wireless settings after logging into the router.

SaveApplyFind the SSID field, enter your preferred network name, and select or . Your router may restart its wireless service, so connected devices could temporarily lose their connection.

10.0.0.1 Piso Wifi

10.0.0.1 Piso WifiThe term is associated with Piso WiFi network systems that use 10.0.0.1 as a local gateway or management address. Depending on the equipment and software, the admin interface may provide tools for managing users, checking connected devices, controlling network access, and configuring Wi-Fi settings.

Because different Piso WiFi systems can use different configurations, 10.0.0.1 should not automatically be assumed to be the correct address. Check the network information or documentation for the particular system you are managing.

How to Check Connected Users

Connected DevicesClient ListDHCP ClientsNetwork MapMany router interfaces include a device-management section where you can see equipment currently connected to the network. After logging into 10.0.0.1, look for options such as , , , or .

The list may show device names, IP addresses, MAC addresses, and connection information. Reviewing this list can help you understand which devices are using your local network.

What is 10.0.0.0.1?

10.0.0.0.1 is a common typing mistake when people are trying to access 10.0.0.1. Standard IPv4 addresses contain four numerical sections separated by three dots, so 10.0.0.0.1 contains too many sections.

10.0.0.1If you are trying to open a router that uses this gateway, enter instead. Also, avoid assuming that a failed login is caused by the IP address alone; your router may use a completely different gateway.

Why Can't I Access 10.0.0.1?

There are several possible reasons why the admin page may not open. Your device may be connected to another network, the router may use a different gateway, or the local IP address may have been changed.

Default GatewayFirst, check your device's network settings and find the . If it shows another address, use that address instead. You can also restart the router, temporarily disable a VPN or proxy, try another browser, and make sure the address is entered directly into the browser's address bar.

How to Keep the Router Secure

The router admin panel controls important network functions, so it should be protected carefully. Change default administrator credentials when possible and use a strong password. Keep the router's firmware updated according to the manufacturer's recommendations.

You should also use a strong Wi-Fi password and appropriate wireless security settings. Avoid giving administrator credentials to people who do not need access to the router configuration.

Can 10.0.0.1 Be Accessed From the Internet?

10.0.0.1No. is a private IP address intended for local network use. It is not a public internet address and cannot normally be reached directly from outside the network.

Remote management is a separate router feature that, when available, can provide remote administrative access. It should only be enabled when necessary and should be configured securely.

Final Thoughts

10.0.0.110.0.0.1 Piso Wifi10.0.0.0.110.0.0.1 can serve as an important local gateway for compatible routers and networking systems. It provides access to useful configuration options for managing Wi-Fi, connected devices, security, and other network features. It is also relevant to setups where the address is configured as the local management gateway. If you encounter , remember that this is usually a typing error; the valid IPv4 address is . Always confirm your actual default gateway before changing any router settings.